0.05%-1.5%
The conventional addition amount of leveling agent is generally controlled within the range of 0.05%-1.5% according to the type, coating system and process conditions. The specific distribution is as follows:
Typical addition range of different leveling agents
Silicone leveling agent: The addition amount is 0.05%-0.5% of the total coating amount. Suitable for occasions with high surface control requirements, such as precision spraying.
Acrylate leveling agent: The addition amount is 0.1%-1.0%, which is suitable for improving the gloss and uniformity of the coating and is commonly used in water-based coatings.
Solid leveling agent (such as powder coating): The addition amount is 0.8%-1.5% of the total formula, which needs to be converted according to the effective content (such as 65% solid leveling agent).
Key factors affecting the addition amount
Coating type: Water-based coatings usually require 0.3%-1.0%, while solvent-based coatings tend to use lower amounts.
Construction requirements: Spraying with high leveling effect may be close to the upper limit, while brushing can be appropriately reduced.
Color and substrate: Dark coatings (such as black) or pure polyester systems may require higher addition amounts.
Note: In actual applications, the optimal ratio needs to be determined through small sample experiments to avoid side effects caused by excessive amounts (such as shrinkage holes and decreased interlayer adhesion).
