Working principle of defoamer

Mar 01, 2025

Leave a message

The working principle of defoamer is mainly to destroy the stability of foam through physical and chemical mechanisms, which can be divided into the following action mechanisms:

1. ‌Reducing local surface tension‌
When defoamers (such as higher alcohols or vegetable oils) are dissolved in the foam liquid, the local surface tension will be reduced, while the surrounding surface tension remains unchanged. This difference causes the foam film to be strongly pulled, stretched, and eventually broken. This mechanism is applicable to defoamer components that are insoluble in water (such as silicones).

2. ‌Destroying membrane elasticity‌
After the defoamer diffuses to the gas-liquid interface, it will weaken the effect of the surfactant, reduce the elastic recovery ability of the foam film, and reduce the stability of the bubble. For example, polyether defoamers inhibit foam regeneration through this mechanism.

3. ‌Accelerate liquid film drainage‌
Defoamers can promote the drainage process of the foam liquid film and shorten the life of the foam. The drainage rate is a key indicator of foam stability. Defoamers accelerate drainage through hydrophobic particles or low molecular weight substances (such as ethanol).

4. ‌Hydrophobic particle effect‌
Hydrophobic solid particles (such as silica) adsorb the hydrophobic end of the surfactant, making it hydrophilic and dissolving into the water phase, destroying the foam structure. Silicone oil defoamers often use this mechanism.

5. ‌Other auxiliary mechanisms‌
‌Electrolyte decomposition of the double layer‌: Electrolytes (such as salts) can destroy the double layer stability of surfactants.
‌"Bridging-spreading" or "bridging-dewetting"‌: Polysiloxane defoamers form oil bridges on the bubble film, causing rupture by spreading (low viscosity) or dewetting (high viscosity).